How to set the Vertical SBX Phone System to Headset Mode
An industry-standard headset can be connected to a station (instead of using the handset or
speaker).
CONDITIONS
• The intercom signaling mode (HF/TN/PV – [TRANS/PGM] + 1 + 2) can be set in Headset
and speaker mode.
• In Headset mode, the User can select an incoming ring mode to hear ringing with the
speaker, headset, or both by Admin programming.
• The station will receive paging with the station speaker.
• To answer an intercom call in Tone mode, the User should press [SPEAKER].
• When an intercom call is received in Privacy mode, the station will be muted automatically.
User should press [MUTE] to answer the intercom call.
OPERATION / SETUP
To change the station from Speaker Mode or Headset:
1. Press [TRANS/PGM], then enter 76 (current answer mode will appear on the display).
2. Press 1 (Speaker mode) or 0 (Headset mode).
To change the Headset Ring mode:
1. Press [TRANS/PGM], then enter 75 (current answer mode will appear on the display).
2. Press one of the following:
1 = Speaker ring only 2 = Headset only 3 = Both
To get more “How To” help with your Vertical SBX Business Phone System look into our extensive Telco Depot Video Library.
