APC Smart-UPS 3000VA RM 2U LCD 120V SMT3000RM2U
Save 21%
SKU: SMT3000RM2U
In stock
List Price: $ 1,890.00
SALE Price: $ 1,499.88
Save $ 390.12

Additional options available for your product:

APC Smart-UPS 3000VA RM 2U LCD 120V SMT3000RM2U

Be the first to review this product

Availability: In stock

$1,499.88
OR

Quick Overview

APC Smart-UPS,2700 Watts /2880 VA,Input 120V /Output 120V, Interface Port USB, Rack Height 2 U

What is the APC Smart-UPS 3000VA RM 2U LCD 120V SMT3000RM2U?

StruxureWare Central compatible 

Enables centralized management via StruxureWare Central.
Predicitive failure notification 
Provides early-warning fault analysis ensuring proactive component replacement.
Sine wave output 
Eliminates humming and heat generated when powering tubelights and fans.
LED Indicators  
Provide easy-to-read status of the unit and utility power conditions.
Boost and Trim Automatic Voltage Regulation (AVR) 
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity 
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Green mode 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter 
Provides actual kilowatt hours of usage for energy conscious users.
Predictive replace battery date 
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Intuitive LCD interface 
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Single switched outlet group 
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Pure sine wave output on battery 
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Disconnected battery notification 
Warns when a battery is not available to provide backup power.
Sequenced network shutdown and reboot 
Customize network shutdown and reboot sequence of connected servers and UPSs.
Outlet group control 
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Adjustable voltage sensitivity 
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points 
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms 
Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown 
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Hot-swappable batteries 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable 
Provides remote power management of the UPS over the network.
Battery failure notification 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity 
Provides management of the UPS via a serial port.
Temperature-compensated battery charging 
Prolongs battery life by regulating the charge voltage according to battery temperature.
USB connectivity 
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Boost and Trim Automatic Voltage Regulation (AVR) 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management 
Maximizes battery performance, life, and reliability through intelligent, precision charging.

 

Features

Technical Details

Output Power Capacity

2700 Watts / 2880 VA
Max Configurable Power
2700 Watts / 2880 VA
Nominal Output Voltage
120V
Output Voltage Distortion
Less than 5%
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
Topology
Line Interactive
Waveform Type
Sine wave
Output Connections
(6) NEMA 5-15RNEMA 5-15R
(2) NEMA 5-20RNEMA 5-20R

Input

Nominal Input Voltage
120V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
NEMA L5-30PNEMA L5-30P
Cord Length
2.44 meters
Input voltage range for main operations
82 - 144V
Input voltage adjustable range for mains operation
75 - 154V

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
3 hour(s)
Replacement Battery
RBC™ Quantity
1
Runtime Graph

Warranty Information:

  • Manufacturer: TelcoDepot.com
APC Smart-UPS 3000VA RM 2U LCD 120V SMT3000RM2U

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Telco DepotTelco DepotTelco DepotTelco Depot