SoundTube’s WX Weather Guard technology utilizes a dual layer hydrophobic material inside the speaker grille to keep water from the drivers and internal electronics in even the most extreme weather conditions. Higher power output for long throw and high SPL requirements. One 5.25-inch polypropylene woofer and one 1.0 inch, tractrix horn-loaded, convex aluminum dome tweeter in a ported enclosure. 87.0 dB average sensitivity offers high output capabilities and reduced amplification costs. Includes stainless steel screws and weatherized components for indoor and outdoor applications. Easy access, six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position. Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity. Aluminum grille with powder-coat finish. Includes the new SM590i-II Stealth™ bracket mounting system. Vertical and horizontal pivoting allow the SM590i-II-WX to be aimed anywhere within the installation space. Low profile enclosure design keeps the speaker close to the wall. UL 1480 (UEAY) planned. Included Accessories: Safety cable with speaker mounting bolt, Euroblock connector, wall mount bracket and terminal weather boot.
SM590i-II-WX Architectural Specifications
The loudspeaker shall consist of a 133 mm (5.25 in) low-frequency transducer and a 25 mm (1 in) high-frequency transducer. The low-frequency voice coil diameter shall be 25 mm (1 in).
Performance specifications of a typical production unit shall be as follows: Useable frequency response shall extend from 69 Hz – 22 kHz (-10 dB, half space, independently verified). Measured sensitivity (2.83-volt input, 1 meter) shall be at least 87 dB. The speaker shall have a nominal impedance of 8 ohms and shall be available for 25/70.7/100-volt modes with transformer bypass. The frequency-dividing network shall have a crossover frequency of 3 kHz with a slope of 12 dB per octave (second order) for the high-pass filter. Rated power capacity shall be at least 80 watts continuous (RMS), and conforms to EIA-426-B testing. Maximum continuous output at 1 meter shall be 106 dB.
The low-frequency transducer shall have a polypropylene cone with butyl rubber surround. The high-frequency transducer shall be constructed of titanium material and incorporate a high-SPL horn.
Installation for the speaker shall be by the new Stealth™ bracket mounting system. A tool-free system with locking mounting plate for either wall or pole mount applications shall be used. For safety redundancy, a secondary cable shall be included and attached to the speaker chassis via an included 1/4-20 UNC bolt. The external wiring input connector shall be a four-pin, 5.08 mm Euroblock for 8 ohm or distributed systems and shall accept from 10 – 22-gauge wire. The system shall be for indoor/outdoor applications and shall have a weather-resistant terminal boot covering all wire connectors. Unit is IP44 approved.
The enclosure shall be constructed of injection-molded, glass-reinforced ABS. The grille shall be constructed of iridite-plated, powder-coated aluminum for lasting performance. Overall cabinet dimensions shall be no more than 289.6 mm (11.40 in) in height by 212.3 mm (8.36 in) in width by 266.2 mm (10.48 in) in depth (including SM bracket). The unit shall include mounting hardware, safety cable, Euroblock connector and terminal weather boot.
The system shall be the SoundTube SM590i-II-WX with mounting hardware for both low- and high-impedance applications.
|Frequency Response (-3 dB)||100 Hz – 22 kHz|
|Frequency Response (-10 dB)||69 Hz – 22 kHz|
|Power Capacity RMS||80 W|
|Max SPL dB @ 1 M||106 dB|
|Nominal Impedance||8 ohm|
|Transformer Options||25 / 70.7 / 100 Volt option|
with a 4 Ohm direct
|Tweeter||1in/25mm Convex Aluminum|
w/ Tractix profile horn
|Woofer||5.25 in / 130 mm Poly|
|Height||289.6 mm (11.40 in)|
|Width||212.3 mm (8.36 in)|
|Depth||266.2 mm (10.48 in)|
|Weight||4.3 kg (9.5 lbs)|
|Shipping Weight||5.0 kg (11.0 lbs)|
|Regulatory- IP||IP44 approved|